Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Summerlin
If you own a home behind a gate in Summerlin, you already know the repair is never quite as simple as it looks. The gate has to work, and it also has to match what the association approved. That’s the reality in 89135, and it’s what we plan around. We’re Gatewood Fence & Gate, locally owned and owner-operated, and we weld and repair on site so your gate stays in your driveway instead of getting hauled away for a swap that fails architectural review. Call (888) 300-3906 and a live person picks up, any hour.
Why Gatewood Fence & Gate Spring Valley Is Summerlin’s Preferred Gate Parts & Welding Company
Summerlin homeowners tend to call us after they’ve been quoted one price on the phone and a different one at the door. We don’t work that way. The price gets quoted and agreed before anyone touches the gate, in writing, and the 90-Day Done Right Promise is stamped on every job so one call brings us back if something isn’t right.
Our technicians have up to 25 years of experience, and every one of them is background-checked. That matters when the work is inside a gated community and a management company needs to know who’s coming through the entry. We service nine major gate brands, including LiftMaster, FAAC, DoorKing, Elite, Ghost Controls, and Mighty Mule, so most Summerlin hardware is familiar territory rather than a research project.
We answer the phone around the clock, not a voicemail or a bot. When you call about a gate stuck open on a Saturday, you get a person who can tell you what the visit looks like. Standing offers carry over here too: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. No haggling required.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Summerlin
Because many Summerlin gates are specified in the association’s CC&Rs, our work here leans hard on matching what the builder installed. Here’s what we handle most in 89135.
Hinge Replacement
A gate sags at the hinge post, not in the middle. That’s where we look first. On Summerlin’s west-facing lots, spring gusts off the Red Rock escarpment work the hinges loose season after season, and the fix is usually re-rigging the original matching hinge rather than bolting on a hardware-store substitute that won’t pass review.

Post Replacement
When the hinge post has loosened in its footing, resetting or replacing the post is the honest repair. Fix the panel without the post and you’ll fix it twice. We set the post to square again so a decorative iron or aluminum gate swings true, then re-verify the operator’s limits and safety photocells against the corrected arc.

Rail Repair
Rails take the heat. Summer UV and 100-degree afternoons can warp metal and throw a rail out of line, especially on fixed HOA-approved designs. We bring the rail back true and weld the joints where they’ve cracked, on site, so the frame stays aligned with the rest of the gate.

Custom Welding
Sometimes the part that failed isn’t something you can order. On original builder hardware, custom welding is how we rebuild a bracket or repair a joint instead of replacing an entire gate that the association wants kept. Our Gate Parts & Welding team does that welding in your driveway, on your property, in the same visit.
Trusted Brands We Service in Summerlin
We’re certified to service nine major gate brands, and in Summerlin the ones we see most on residential driveways are LiftMaster, FAAC, DoorKing, and Mighty Mule. When a repair turns on a specific part, we order what the gate actually needs instead of forcing a substitute. No, we don’t stock parts on a truck, but turnaround is quick because we know what to order the first time. If your operator is failing after a dust storm, the fix is usually limits, sensors, or a control board, and it’s diagnosable in one visit.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Summerlin Homes
- Hinge post loosening after wind gusts. A spring gust knocks an HOA-specified swing gate out of square, the latch stops catching, and inspection shows the post footing, not the panel, is the culprit. Resetting the post and re-rigging the original hardware solves it.
- UV and heat warping the panel. Summerlin’s extreme summer sun degrades operators and can warp metal panels on fixed HOA-approved designs, which then misalign the latches and rollers they ride on.
- Latch and roller wear on decorative gates. The iron and aluminum driveway gates common in master-planned Summerlin homes wear their rollers and latches faster under heat and dust, and the wear shows up as a gate that drags or won’t close flush.
- Off-the-shelf hardware rejected at review. A homeowner replaces a latch or hinge from a big-box store, then finds the substitute doesn’t match the builder’s original gate schedule and the association flags it. Matching hardware avoids the do-over.
Pricing for Gate Parts & Welding in Summerlin, NV
A typical hinge replacement in Summerlin runs $150 to $350, and resetting or replacing a hinge post runs $250 to $600 depending on the footing and whether the gate is iron or aluminum. Rail repair with on-site welding generally lands between $200 and $500. Custom welding on original builder hardware is quoted per job, usually $175 to $450. What moves the number is the gate’s material, how deep the post damage goes, and whether the operator needs re-setting afterward. You get the price quoted and agreed before any work starts, so the number you hear is the number you pay. Estimates are free, and a second opinion on any written estimate costs nothing.
We Also Serve Cities Near Summerlin
Summerlin sits alongside a handful of communities we work in regularly. If you’re just outside the 89135 boundary, we also serve Summerlin-area neighbors in Spring Valley, Las Vegas, Winchester, and Paradise. Same welding on site, same written price, same 90-Day Done Right Promise wherever the gate sits.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Summerlin
Usually no. Because many Summerlin gates in 89135 are specified in the association’s CC&Rs, a matching replacement is what keeps you out of architectural review trouble. An off-the-shelf hinge may fit but won’t match the builder’s original schedule, and that’s where reviews get rejected. We re-rig the original matching hardware instead. Call (888) 300-3906 for a free estimate.
Wind is the usual answer. Spring and monsoon gusts funneling off the Red Rock escarpment strain hinges and latch alignment along west-facing streets in 89135, and the hinge post loosens in its footing before the panel itself bends. The fix is resetting the post and re-rigging the hinges and latch, not replacing the gate. Call us and we’ll take a look.
On a shared entry gate, yes, coordinate with the management company before work starts. Welding or a post replacement that changes the gate’s appearance or hardware can trip architectural review, and shared systems affect every resident. We plan the job around the association’s requirements so there are no surprises at closing. Call (888) 300-3906 and we’ll walk through it.
An automatic gate needs working safety edges or photocells, plus the operator’s limits set to the gate’s actual swing. Summerlin’s heat and dust can degrade sensors and throw limits off, so these get checked after any post or hinge repair. Get this right before the operator runs; it’s a safety matter, not a convenience.
Most often it’s the safety photocells or the limits, not the motor itself. Monsoon dust coats the lenses and the operator’s electronics, and the controller reads a blocked path or loses its limit reference. We diagnose it in one visit and repair before suggesting any replacement. Call (888) 300-3906 for a free estimate.
Written by the team at Gatewood Fence & Gate.