A Gatewood company - serving Spring Valley, NV
Gate Parts & Welding in Las Vegas, NV | Gatewood Fence & Gate Spring Valley - Gatewood Fence & Gate Spring Valley

Gate Parts & Welding in Las Vegas - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Las Vegas

If a gate in Las Vegas has started to sag, catch, or grind, you probably already know something underneath it has moved. That’s usually true. Most yard gates in Las Vegas are anchored into caliche and masonry-block walls, and the footing is the part that fails first, not the panel. We repair gates right where they hang – welding on site, resetting posts that cracked at the soil line, replacing hinges instead of replacing the whole gate. A live person answers the phone at (888) 300-3906, day or night.

Call (888) 300-3906

Why Gatewood Fence & Gate Spring Valley Is Las Vegas’s Preferred Gate Parts & Welding Company

People in Las Vegas call us because they want a name they can check and a crew that shows up when they said they would. Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise in writing – if it’s not done right, we make it right. No fine print, no “in most cases.”

We know this ground. The tract homes on the west and northwest side – out around 89149 and 89131 – have gates all hitting the same 15-to-20-year failure window at once, so we see the same cracked hinge posts and torqued welds over and over. We also know what a hundred-degree summer does to a wood panel and what a single monsoon does to a gate that was swinging fine the week before.

Pricing is quoted and agreed before any work starts, so the number you hear is the number on the invoice. Seniors and veterans get a permanent 10% discount, and there’s no trip charge inside the county. If you’ve got a written estimate from someone else, we’ll give you a free second opinion on it.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Las Vegas

Hinge Replacement in Las Vegas

A gate sags at the hinge post, not in the middle, and that’s where we start. On Las Vegas block-wall side gates, the hinges take the wind load from solid infill panels, so the weld at the hinge plate opens a crack that widens with every storm. We cut out the failed plate, weld a new one on site, and check the post underneath before we call it done. Fix the hinge without checking the post and you’ll fix it twice.

Hinge Replacement in Las Vegas

Post Replacement in Las Vegas

This is the job most people don’t know they need. Posts set down into caliche crack at the soil line after a few 100°F+ summers, and flash-flood runoff undercuts those same footings, which is why one monsoon can leave a gate binding out of nowhere. We reset or replace the post and anchor, working with the masonry pillar or wall it ties into. Our technicians keep hinge plates and post anchors on hand as standard stock, because around here it’s rarely just the hinges.

Post Replacement in Las Vegas

Rail Repair in Las Vegas

Monsoon microbursts put real wind load on a solid-infill gate, and that load torques the rails and the rail-to-stile joints. When a rail joint cracks, we re-weld it or replace the rail rather than patch over it. On sliding gates we also check the track, since dust and grit pack in and fight the rollers.

Rail Repair in Las Vegas

Custom Welding in Las Vegas

Gates get hit, bent, and modified over the years, and sometimes the fix is a weld, not a new gate. We do custom welding on site – brackets, stops, hinge plates, rail sections, tie-ins to block walls – so the gate stays in your driveway. If you want a look at the full range of what we handle, see our Gate Parts & Welding services.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (888) 300-3906

Trusted Brands We Service in Las Vegas

We’re certified to service nine major gate brands, including BFT, Linear, Viking, and Ghost Controls. That matters on repair calls because a binding gate can fool you – sometimes it’s the hardware, sometimes the operator is stalling because the gate is out of true. We don’t claim a stocked parts warehouse; what we do is diagnose right the first time and get the part you need without guesswork. When an operator is involved, we re-mesh the rack and pinion and test the safety photocells on the same visit.

Common Gate Parts & Welding Problems We See in Las Vegas Homes

  • The hinge post cracks at the soil line. After several summers over 100°F, the post where it meets the caliche footing lets go, so the gate sags even though the panel and hinges look fine. It’s the footing, not the panel.
  • Monsoon dust and runoff pack into hinges and tracks. Grit and flash-flood runoff jam the hinge side and slide-gate tracks, binding the gate and stalling the operator or burning out its battery.
  • Wind load torques solid-infill gates. Microbursts push on a solid panel, opening cracks at the hinge plates and rail joints on masonry-pillar side gates, and each storm makes them a little worse.
  • Builders’ hardware on newer west-side gates. The 2000s-and-later builds out toward 89144 and 89131 often carry builder-grade sliding operators that wear faster here than the gate itself.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Parts & Welding in Las Vegas, NV

Here’s roughly what this work runs in Las Vegas. Hinge replacement typically lands around $150-$300 per gate, post replacement and footing reset $350-$900 depending on how deep the caliche goes, rail repair $120-$280, and custom welding $100-$250 by the job. On an operator gate, re-meshing the rack and pinion and testing the safety photocells usually adds $100-$200. What moves the number is access to the post, whether the footing needs rebuilding, and how much rust or bent metal we’re working around.

Every price is quoted and agreed before any work starts. There’s $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Call (888) 300-3906 for an exact quote.

We Also Serve Cities Near Las Vegas

We work gates all around the valley, including Winchester, North Las Vegas, Sunrise Manor, and Paradise. The same caliche-and-block-wall problems show up across those lines, so the repair is the same whether you’re inside Las Vegas or just over the border. If you’re nearby, mention where you are when you call and we’ll tell you what to expect.

Serving Las Vegas, NV – Our Local Coverage Area

We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Las Vegas

Get Your Las Vegas Gate Fixed Right

If your gate is sagging, binding, or cracked at the post, don’t wait for the next storm to make it worse. We weld on site, reset what’s cracked, and stand behind the work with the 90-Day Done Right Promise in writing. Our technicians have up to 25 years of experience, there’s no trip charge inside the county, and pricing is always agreed up front. Call (888) 300-3906 for a free estimate on gate parts and welding in Las Vegas.

Written by the team at Gatewood Fence & Gate.

Why Las Vegas Chooses Gatewood Fence & Gate Spring Valley

We set the standard for gate parts & welding in Las Vegas.

30-60 Min Response

Fast dispatch across Las Vegas. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Las Vegas

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Las Vegas - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Las Vegas Customers Say

Trusted by homeowners across Las Vegas and surrounding areas.

★★★★★

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

Salvador Arredondo
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg
★★★★★

"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."

Judith Stallworth

Ready for Gate Parts & Welding in Las Vegas?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Las Vegas.

(888) 300-3906

Request a Free Estimate in Las Vegas

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch