Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Spring Valley, NV
Automatic gate repair in Spring Valley typically runs $175 to $650 depending on whether the problem is mechanical (hinges, rollers, tracks), electrical (motor, control board, battery), or access control (keypad, remote receiver, loop sensor). Most repairs we see are back to normal the same day. A gate that stops mid-travel, reverses for no reason, or won’t respond to a remote is usually a motor or sensor issue, not a gate that needs to be replaced, and that’s the call we answer most often in Spring Valley.
Gatewood Fence & Gate Spring Valley is owner-operated, which means the person who diagnoses your gate is the person who fixes it and the person who answers the phone when you call back. We’ve been doing this since 2001, and our technicians bring up to 25 years of experience to every driveway. If you want a real answer about an automatic gate that’s giving you trouble, call (888) 300-3906. A live person picks up, 24 hours a day.
Automatic gates are a different animal from a manual swing gate. They have motors, control boards, safety sensors, battery backups, and access hardware that all have to agree with each other. When one fails, the whole gate stops. We handle automatic gate repair as part of our broader Gate Repair service, and we treat it as its own discipline because that’s what it is. You can also see the full scope of what we do on our home page.
When You Need Automatic Gate Repair
A stopped gate is rarely a mystery. Here are the calls we get in Spring Valley, and what they usually mean.
- The gate opens partway and reverses. On most LiftMaster and Linear operators, this means a safety sensor or a limit switch is out of adjustment. Often it’s the same sensor tripped by a low sun angle in the late afternoon, which is why it seems to fail “randomly” around 5 p.m.
- The remote no longer works, but the wall button does. That’s a receiver or antenna issue, not a motor problem. We see this on Ghost Controls and Mighty Mule systems where the receiver has gone bad after years of heat cycling in the summer sun.
- The gate moves slowly or stalls halfway. Usually a failing battery in a solar-powered setup or a worn drive gear. Viking and BFT swing operators are the most common offenders in this pattern.
- The gate won’t close at all. Safety loop, photo-eye, or control board. The gate is doing exactly what it was designed to do when it thinks something is in the path. Do not bypass the safety device to “test” it; that’s how people get hurt.
- A grinding noise, then nothing. Gearbox failure. It’s repairable on most brands, and we’d rather rebuild it than sell you a new operator.
- The keypad or call box stopped working. DoorKing and Elite access control on gates around Spring Valley often need a control board reset or a battery replacement in the keypad, and sometimes the wiring has been chewed through by a squirrel. It happens more than you’d think.
If your gate is doing any of these, don’t keep pressing the remote hoping it’ll change its mind. Call (888) 300-3906. We can tell you a lot over the phone, and if you’re inside the county, there’s no trip charge to come look.
Our Automatic Gate Repair Process
Here’s exactly what happens when you call us for automatic gate repair in Spring Valley:
- You call, a live person answers. Not a voicemail, not a phone tree. We ask a few questions about the gate and the operator so we can show up with the right parts and save you a second visit.
- We come out and diagnose on site. We test the motor, the control board, the safety devices, the battery, and the access hardware. You get a written estimate before any work starts, and the price on that estimate is the price you pay. No surprises at the door.
- We repair first. Most automatic gate problems are fixable without a new operator. We weld, we adjust, we replace a sensor, we swap a control board. If the fix is a $180 safety sensor rather than a $1,400 new motor, we tell you that.
- On-site welding when metal is involved. A bent hinge post or a cracked mount doesn’t require hauling the gate to a shop. We fix it in your driveway, which means the gate stays where it lives and you don’t lose a week waiting on a pickup and delivery.
- We test everything, twice. Safety reverse, obstruction sensing, travel limits, remote range, keypad entry, and battery backup. Then we walk through it with you so you know what we touched.
- You get the 90-Day Done Right Promise in writing. If something we fixed acts up within 90 days, one call brings us back. No runaround.
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate has a brand name on the control box, we can work on it.
Automatic Gate Repair Pricing in Spring Valley
Here are honest ranges based on what we actually charge in Spring Valley. Every job is different, which is why we give you a written estimate before anything starts.
| Repair | Typical Price Range |
|---|---|
| Safety sensor / photo-eye repair or replacement | $175 – $320 |
| Remote receiver or antenna repair | $150 – $280 |
| Control board replacement | $280 – $550 |
| Battery replacement (solar or backup) | $180 – $350 |
| Drive gear or gearbox rebuild | $350 – $650 |
| Hinge post repair or on-site welding | $200 – $480 |
| Limit switch or travel adjustment | $150 – $275 |
What drives the price up? Brand and age of the operator (a DoorKing access control board costs more than a Mighty Mule sensor), whether the wiring has to be re-run, and whether the gate itself is out of alignment. What drives it down? Same-day fixes that are pure adjustment. We’ve handled plenty of those in Spring Valley for under $200.
What doesn’t change: our standing offers. $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. No haggling required. Call (888) 300-3906 for a free estimate.
Why a Local Gate Specialist Makes a Difference
Automatic gates fail the way everything fails in the desert Southwest: heat, dust, and UV exposure. Control boards in an unshaded box on a Spring Valley south-facing wall run 30 to 40 degrees hotter than ambient in July, and that’s where capacitors and solder joints give out. We see more control board failures between June and September than the rest of the year combined. We know this because we live here.
Safety is the other thing. An automatic gate runs on a motor with enough torque to seriously hurt a person or a pet. If your gate’s safety reverse isn’t working, stop using the automatic function and call us. Do not try to bypass the safety device yourself. We test obstruction sensing on every job, and if it fails, it gets fixed before we leave.
You can drive to the shop and look us in the eye. Our address and license number are published, and the name on the invoice is the name on the door. That’s the oldest accountability there is.
Automatic Gate Repair Across the Valley
We repair automatic gates throughout the Spring Valley area and the surrounding communities. If you’re nearby, see our other local pages: Gate Repair in Spring Valley, and our guides on gate motor repair, gate opener repair, and gate access control. Looking for a neighboring service area? Try gate repair in Las Vegas, gate repair in Henderson, gate repair in North Las Vegas, or our Paradise and Enterprise pages.
We also install new gates, when a repair isn’t the right answer. Learn more about automatic gate installation, gate operator installation, swing gate repair, and gate welding repair. If you just need parts, we handle gate parts too.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in Spring Valley?
Most automatic gate repairs in Spring Valley cost between $150 and $650, with a typical safety sensor or receiver repair landing around $200 to $300. Control board replacements and gearbox rebuilds sit at the higher end. You get a written estimate before any work starts, and the price doesn’t change at the door. Call (888) 300-3906 for a free estimate.
Can you repair my automatic gate the same day?
In most cases, yes. We carry common parts for LiftMaster, Linear, Viking, BFT, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we can often fix the gate on the first visit. Call early in the day and we’ll tell you whether same-day is realistic for your specific gate.
My gate won’t respond to the remote. Is the motor bad?
Usually not. If the wall button still opens the gate but the remote doesn’t, the motor is fine and the problem is the remote receiver or the remote itself. That’s one of the cheaper repairs we do, and it doesn’t require replacing the operator.
Is it cheaper to repair or replace an automatic gate operator?
Repair is cheaper in most cases, and it’s the first thing we look at. A new operator installed runs well into four figures. A control board or sensor repair typically costs a fraction of that. We only recommend replacement when the operator is beyond economical repair, which we’ll tell you straight. For a free second opinion on any written estimate, call (888) 300-3906.
If your automatic gate is stuck open, stuck closed, or behaving in a way that worries you, call (888) 300-3906 today. A live person answers 24 hours a day, seven days a week, and we’ll give you an honest answer about what’s wrong and what it costs to fix. Free estimates, no trip charge inside the county, and the 90-Day Done Right Promise on every job.
Written by the team at Gatewood Fence & Gate Spring Valley, serving Spring Valley.