Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Henderson
If your driveway gate is dragging, won’t latch, or the opener has quit, the repair starts with one honest look at the gate itself – not a sales pitch for a new one. In Henderson, that look has to account for more than a hinge: HOA rules about how a gate looks, hillside driveways that move under their posts, and desert sun that eats finishes faster than it should. We know this ground. Call (888) 300-3906 and a live person answers, day or night.
Why Gatewood Fence & Gate Spring Valley Is Henderson’s Preferred Gate Repair Company
Our technicians have up to 25 years of experience, and the work carries the 90-Day Done Right Promise in writing on every job. For Henderson homeowners, that matters in a market where so much of the gate work runs through gated and master-planned communities, and where a botched repair can put you crosswise with an HOA board before it ever looks wrong to you.
Henderson customers call us back because the estimate is agreed before any work starts and it doesn’t change at the door. That’s the whole idea behind the upfront pricing: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. No haggling required. We also offer a free second opinion on any written estimate you’ve already been handed.
We service nine major gate brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – which means fewer jobs get talked into a full replacement just because the opener brand is unfamiliar. And if you’re looking for Gate Repair you can actually reach and question, that’s what we do.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Henderson
Most of what we see in Henderson falls into four buckets. Here’s how each one works in this town specifically.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle – and that is where we start. In Seven Hills and Anthem, the post is often set into a sloped driveway or a view-lot retaining wall, so soil settling and wall movement can throw it out of plumb and make a perfectly good gate drag or swing on its own. We fix the post first, because fixing the panel without the post means you’ll fix it twice.

Gate Realignment
When a gate has shifted out of square, realignment gets it closing clean and latching without force – not by cranking the hinges tighter and calling it fixed. On flat-lot homes throughout Green Valley and the 89074 ZIP, that’s usually a straightforward adjustment. On the hillside lots, it starts with checking what the post is actually sitting on.

Electric Gate Repair
Electric driveway gates in Henderson take a beating from the sun and the dust. We trace the problem to the source – a failed operator, a bad loop detector, a control board baked by the heat – rather than swapping parts that don’t need swapping. Many of these gates sit at the end of a long drive, so it’s worth having the whole system looked at while we’re there.

Automatic Gate Repair
Automatic gates in HOA shared entry systems need the safety edges and photocells working as much as the motor. Monsoon-season wind and dust fouling those sensors is one of the most common calls we get in Henderson. We service Linear, Viking, Ghost Controls, and DoorKing operators, along with the rest of the major brands.
Trusted Brands We Service in Henderson
We don’t stock parts on a truck – when a job needs a specific bracket, a replacement control board, or a color-matched powder-coat panel, we source it and get it installed on a return visit. That keeps turnaround honest instead of promising a part we don’t have. We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we’re comfortable with the older builder-grade operators still running in Henderson’s 1990s subdivisions. If you’re not sure what brand is on your gate, we can identify it on the first visit.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Henderson Homes
- Hinge post settlement on sloped driveways in Seven Hills and Anthem. Gates on view lots and hillside drives move with the soil, and the post goes out of plumb long before the gate itself wears out. The result is drag, self-swing, and a latch that won’t catch without a shove.
- UV-degraded powder coat and finish cracking, especially on south- and west-facing gates. Intense desert sun breaks down the finish years ahead of shaded gates, and once the coating cracks the steel underneath starts to rust and the hardware starts to seize.
- Operator failure from dust and monsoon winds. In HOA shared entry systems, dust and wind foul loop detectors and safety photocells, and the gate stops responding when the board can’t see a clear signal.
- Builder-grade hardware hitting the 15-25 year mark. Henderson is mostly 1990s-2010s master-planned housing, so the original hinges, latches, and operators are all aging out around the same time – and often on the same street.
Pricing for Gate Repair in Henderson, NV
Here’s what gate repair typically runs in this market. A hinge or post repair usually lands between $150 and $400 depending on whether the post footing needs work. A standard realignment runs $100 to $250. Electric or automatic gate repair tends to run $180 to $450 for sensor, board, or operator faults, and weld or rust repair on a wrought-iron gate runs $200 to $500 by the job. HOA color-matching powder coat can add $100 to $300 when it’s needed for approval.
What moves those numbers is footing depth, hardware availability, and how much of the finish needs to be redone to satisfy an association. Every job gets a written quote and an agreed price before we start – nothing shows up on the invoice that wasn’t in the estimate. Estimates are free, and we offer a free second opinion on any written estimate you already have.
We Also Serve Cities Near Henderson
We also handle Gate Repair in Henderson and the communities around it – Boulder City, Whitney, Paradise, and Enterprise. If your gate is in the 89011, 89044, 89012, or 89074 ZIP and you’re just outside Henderson proper, call us and we’ll let you know if we cover the street.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Henderson
Yes, for anything that changes how the gate looks – style, height, or finish – you’ll typically need HOA architectural review first. Straight repairs to an existing approved gate usually don’t require review, but matching the original finish does. We work with HOA boards and property managers regularly and can tell you what to expect before you file. Call (888) 300-3906 for a free estimate.
Because the hinge post has moved, not because the panel is bent. In Seven Hills, gates sit on sloped drives and view-lot walls where soil settling and retaining-wall movement throw the post out of plumb, and the gate starts dragging or self-swinging. The fix is at the footing, not the hinge. Call (888) 300-3906 and we’ll take a look.
Start with the safety photocells and loop detector, which are the most common casualties of monsoon dust and wind. Look for dirt or debris on the sensor lenses and check whether the gate reverses immediately after starting to close. If it still won’t run, the control board needs a look – that’s not a job for a homeowner to open up. Call (888) 300-3906.
Usually, yes. Color-matching means sourcing the closest standard powder-coat match or having a custom batch made, and it can add $100 to $300 to the job depending on the finish. We’ll confirm the color against your HOA documentation before ordering. Call (888) 300-3906 and bring your approval paperwork to the estimate.
We’re certified to service nine major brands including LiftMaster, Linear, Viking, Ghost Controls, DoorKing, FAAC, BFT, Elite, and Mighty Mule. That covers nearly everything on gates in Henderson’s master-planned communities and older subdivisions alike. If you’re not sure what’s on your gate, we’ll identify it on the first visit. Call (888) 300-3906 for a free estimate.
Whether it’s a dragging gate in Anthem, a dead operator in Green Valley, or a post that’s shifted in Seven Hills, we’re a phone call away. A live person answers (888) 300-3906 around the clock. Estimates are free, pricing is upfront and agreed before any work starts, and every job is backed by the 90-Day Done Right Promise in writing. Call today.
Written by the team at Gatewood Fence & Gate.