Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Whitney
A gate that won’t latch or a motor that won’t answer is a real problem on a Whitney lot where the gate is the driveway. We handle gate repair in Whitney with people who know this valley: the block pillars, the wide double swings, the way the desert heat goes after every operator. We answer the phone with a live person at (888) 300-3906, and we carry a 90-Day Done Right Promise in writing. Most repair calls are quick once we see the gate.
Why Gatewood Fence & Gate Spring Valley Is Whitney’s Preferred Gate Repair Company
Gatewood Fence & Gate has been locally owned and owner-operated since 2001, which is a long time in a valley that keeps changing names on the map. Whitney homeowners call us because the estimate they get is the price they pay, and because we fix the gate that’s already in the driveway whenever fixing it is the right move. On-site welding keeps a lot of gates alive that other companies would just haul off and swap for new.
Our technicians have up to 25 years of experience, and they’ve spent much of it on gates exactly like the ones in Whitney: block-pillar double swings, side-yard RV gates, and solar operators out on the longer driveways. We’re background-checked on every job, and a live person answers the phone around the clock. If it’s not done right, one call brings us back. Seniors and veterans get a permanent 10% discount, and there’s no trip charge inside the county.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Whitney
Whitney’s gate work isn’t the same as a walk-through in a gated community. Most of what we see out here is heavy, wide, and bolted to concrete block. That shapes what we do and how we do it. Here’s where the calls come from.
Electric Gate Repair
Extreme desert heat and UV bake gate operators, keypads, and photo-eye housings. When a Whitney electric gate stops responding, the operator box is usually the first place we look. We’re certified to service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we can diagnose the motor you already own instead of selling you a new one. If a controller or limit switch has failed, we’ll tell you plainly whether it’s a repair or a replacement day.

Automatic Gate Repair
Automatic gates fail in slow motion here. The gate still opens, then hesitates, then needs a nudge, then one morning it doesn’t. On Whitney’s east-side streets, where the standard RV gate is a 12-16 ft double swing hung on block pillars, an automatic gate that suddenly won’t close often isn’t a motor problem at all. It’s a pillar that has shifted. We check the post before we touch the arm.

Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. Whitney’s original 1990s-2000s steel frames and gravity hinges are now rusted, sagging, or frozen across much of the neighborhood, and the fix is often re-setting the post footing rather than adjusting the hinge. Fix the panel without the post and you’ll fix it twice. Our on-site welding means the gate stays in your driveway through the work.

Gate Realignment
The valley’s caliche-heavy, shrinking clay soils shift block pillars and fence lines, and the gate follows. Realignment on a Whitney swing gate means leveling the hinge post, correcting the pillar lean, and then re-hanging the gate so the latch lines up the way it’s supposed to. Show us a gate closing on its own and we’ll show you where it’s failing. We bring a level to every realignment because eyeballing it is how you end up back out here next season.
Trusted Brands We Service in Whitney
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we know the quirks of each one. We don’t claim to stock parts on a truck or warehouse a shelf of controllers; what we do is bring the right knowledge to your driveway, diagnose the brand you already have, and get the part ordered fast when it’s a hard-to-find component. On a solar Ghost Controls setup out on a long Whitney driveway, or a DoorKing on a shared entrance, we’ve seen the failure before. That saves you days of guesswork and a second call.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Whitney Homes
- Leaning block pillars that miss the latch. On Whitney’s 12-16 ft double RV gates, soil movement leans the pillar and the latch never lines up again. Re-setting the post footing fixes it; adjusting the hinge won’t.
- Rusted, frozen steel frames and gravity hinges. Much of Whitney’s housing went in during the 1990s-2000s boom, and those original frames are hitting end-of-life at the same time. Gates that used to swing with one hand now need two.
- Solar operator batteries baked by the sun. On rural Whitney acreage entrances where mains power isn’t practical, the battery bank is often the first thing to die. Desert heat and UV take them out early.
- Photo-eye and keypad housings cracked by UV. The sun here degrades plastic housings and lens covers. When the safety eyes fail, the gate stops closing to protect you, and that’s a common surprise no-start.
Pricing for Gate Repair in Whitney, NV
We quote before any work starts, and the price we say is the price you pay. A typical hinge or post repair in Whitney runs $150 – $350, and a gate realignment usually lands around $125 – $275. Electric and automatic gate repair in Whitney generally runs $175 – $450 depending on whether it’s a controller, a limit switch, or a full operator service. Weld and rust repair ranges $100 – $300, and lock repair is often $90 – $200. Solar operator and battery replacement on a long driveway is a bigger job and typically runs $300 – $700 installed.
We’re on-site welding, so a sagging frame gets fixed where it hangs rather than replaced. There’s no trip charge inside the county, and a $40 discount applies to any repair over $200. Seniors and veterans get a permanent 10% discount. Ask for a free second opinion on any written estimate from another company; we’ll look at it honestly.
We Also Serve Cities Near Whitney
Whitney sits inside a tight stretch of the valley, and we take repair calls all around it. If you’re just outside the community, our Gate Repair team covers Sunrise Manor, Winchester, Paradise, and Las Vegas too. Same phone, same promises, same written price. Call (888) 300-3906 and tell us where the gate is.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Whitney
No, adjusting the hinges won’t fix it, because the hinges aren’t the problem. On Whitney’s 12-16 ft double swings, the block pillar has leaned as the caliche-heavy clay soil shifted, and the gate panel can’t reach a latch that moved with the post. The real fix is re-setting the post footing and then realigning the hinges and operator bracket. Call (888) 300-3906 for a free estimate, and we’ll check the post with a level before we quote a thing.
Because the desert heat and intense UV here age every operator’s electronics, battery, and plastic housings faster than in cooler climates, and most Whitney operators were installed during the 1990s-2000s building boom, so they’re all reaching end-of-life at once. A controller, limit switch, or battery bank that would last longer elsewhere often gives out sooner out here. We’re certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we can tell you whether the motor can be saved. Call (888) 300-3906 for an honest answer.
Yes, and it’s often the only practical option where running mains power down a long driveway is cost-prohibitive. The catch is that the battery bank takes a beating from the desert sun, so it needs to be sized right and checked periodically. A heavy-duty solar-rated operator matched to the gate’s span and weight will hold up; an undersized one won’t. Call (888) 300-3906 for a free estimate on a solar setup for your Whitney entrance.
Automatic gates need functioning safety devices – typically photo-eye sensors and, for many installations, edge sensors that stop or reverse the gate on contact – so a closing gate can’t trap a person, pet, or vehicle. In Whitney, our extreme heat and UV degrade the plastic housings and lens covers on those eyes, which is why they’re a common failure point and a common surprise no-start. We test and repair safety devices on every automatic gate call. Call (888) 300-3906 to get yours checked.
A slide gate that jumps or slips is usually riding on worn rollers, a misaligned track, or a gate that’s been knocked out of square, and on Whitney’s shifting clay soils, a post or track that has settled is often the root cause. Fixing the rollers alone won’t help if the track is no longer true. We’ll check the gate for square, the track for level, and the rollers for wear before recommending a fix. Call (888) 300-3906 for a free estimate.
When a gate is stuck open, won’t latch, or a motor has given up, the fastest path is a phone call. Reach us at (888) 300-3906 for a free estimate on gate repair in Whitney. A live person answers, the price is agreed before any work starts, and every job is backed by the 90-Day Done Right Promise in writing. If you’d rather look us in the eye, the name is on the shop and the shop is down the road.
Written by the team at Gatewood Fence & Gate.