Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Whitney, NV
If your RV gate has stopped latching, your driveway gate drags on the concrete, or the arm on your opener groans and gives up halfway open, you’re in the right place. Whitney’s gates take a beating that gates in other parts of the valley don’t – wide double swings hung on block pillars, baked by sun, shifted by soil. We fix them in your driveway, usually on the first visit. A live person answers when you call (888) 300-3906, day or night, and we’ll give you a straight answer about what’s wrong and what it takes to fix it.
Why Whitney Homeowners Choose Gatewood Fence & Gate Spring Valley
Most folks who call us in Whitney have already been through the wringer. A company quotes a number over the phone, shows up late, and the invoice at the door is three hundred dollars more than what was agreed. We don’t work that way. The price we quote is the price you pay, agreed before anyone touches your gate. If we can’t fix it, you don’t pay for a repair – and we’ll tell you that upfront instead of selling you something you don’t need.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right, and one call brings us back. Our technicians have up to 25 years of experience, and they’re certified to service LiftMaster, DoorKing, Ghost Controls and several other major brands – so whether your operator is a newer Mighty Mule or an older DoorKing you’ve had for fifteen years, someone who knows that model shows up. We’re licensed and insured, and neighbors in Sunrise Manor and the neighborhoods around Frenchman Mountain have been calling us for the same reason: we show up when we say we will.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Whitney
Gate Repair
Sagging hinges, broken latches, bent frames, gates that scrape the ground or won’t line up with the strike – that’s the work we do most in Whitney. We weld on site and reset posts when the post is the real problem. Learn more about our Gate Repair in Whitney.

Gate Installation
New double-driveway swing gates, RV-access gates on block pillars, and ornamental walk gates, sized and hung to your actual opening rather than a stock measurement. We measure first, then order, then schedule. Learn more about our Gate Installation in Whitney.

Gate Motor & Opener
Desert heat and UV kill operators faster than anything else – control boards, keypads, and photo-eye housings all cook in the summer. We diagnose the operator and fix what’s actually failing instead of swapping the whole unit. Learn more about our Gate Motor & Opener in Whitney.

Gate Access Control
Keypads, entry systems, and remote programming for driveways and side-yard gates, including retrofitting access control onto an older gate without replacing the operator. Learn more about our Gate Access Control services in Whitney.
Gate Parts & Welding
Hinges, rollers, latches, brackets, and on-site welding so the gate stays in your driveway rather than going to a shop for a week. Learn more about our Gate Parts & Welding in Whitney.
If you want the full picture of how we work, start at our home page and see what we do across the valley.
Neighborhoods We Serve in Whitney
We work all over Whitney, from the streets off Russell Road up through the neighborhoods near Sam Cooper Boulevard and the 89122 corridor, and out toward the Sunrise Manor side where the lots get wider. Typical response time across the area is same-day for repair calls when you reach us in the morning, and next-day for calls that come in late. A short list of the areas we’re in most:
- Russell Road and Whitney Ranch-adjacent streets
- Sam Cooper Boulevard and the neighborhoods east of it
- The wide-lot streets toward Sunrise Manor
- 89122 addresses throughout unincorporated Whitney
Why Whitney’s Climate & Housing Affect Gate Repair
Whitney is a different kind of gate town than most of the valley. It’s unincorporated, and the lots are wider than average, which means most properties here have block-wall perimeter fencing and a side-yard RV gate instead of a decorative walk-through. On the east-side streets, the standard RV gate is a 12 to 16 foot double swing hung on block pillars – and that shape drives almost every repair we make.
The real trouble is the ground. Whitney’s caliche-heavy clay soils shrink and swell through the year, and the block pillars settle and lean with them. When a pillar leans, the latch never lines up again, so adjusting the hinge gets you a week of working gate and then it’s back. The fix is re-setting the post. The second trouble is age: almost all of Whitney’s housing went in during the 1990s and 2000s boom, which means the original steel frames, gravity hinges, and operator brackets are all reaching end-of-life at the same time. And the heat does the rest – operators, keypads, and photo-eye housings bake in the summer UV, and monsoon downbursts have a way of bending the lighter ornamental gates on the west-side streets.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Whitney
Straight numbers, so you know roughly what you’re looking at before anyone comes out:
- Hinge and latch repair: $95 – $225
- Sagging gate adjustment and re-hang: $120 – $280
- Post or block-pillar re-set: $250 – $650
- Operator or motor repair: $150 – $450
- Keypad or access control repair: $125 – $350
- On-site welding repair: $150 – $400
Every price is quoted and agreed before work starts, so nothing shows up on the invoice that wasn’t on the quote. We also take $40 off any repair over $200, there’s no trip charge inside the county, and seniors and veterans get a permanent 10% discount. Have a written estimate from someone else? We’ll give you a free second opinion on it.
Service Area – Cities Near Whitney
Whitney sits right next to a lot of the valley, and we cover it. We work in Sunrise Manor just east, Winchester to the west, Paradise to the southwest, and Las Vegas proper. If you’re not sure whether you’re in our area, call and ask – it’s a short answer.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Whitney
Most RV gate repairs in Whitney run $120 to $400, depending on whether it’s a hinge, a latch, a post re-set, or an operator issue. The wide double swing gates on block pillars are the most common job here, and a leaning pillar adds to the cost because the post has to be re-set. Call (888) 300-3906 for an exact quote – estimates are free.
Most days, yes. We answer the phone around the clock, and repair calls that come in during the morning are usually same-day. If you’re in Whitney and we can’t make it today, we’ll tell you the next window we’ve got rather than leaving you guessing. Call (888) 300-3906 and we’ll give you a straight answer.
Yes, almost always. The gate isn’t the problem – the pillar is. When the caliche clay shifts, the pillar leans, and the latch never lines up again. We re-set the post rather than adjusting the hinge, which is the fix that actually lasts. Call (888) 300-3906 and we’ll come look at it.
Heat and UV. Whitney’s summer sun bakes operator control boards, keypads, and photo-eye housings, and older units run hotter than the newer ones. Sometimes it’s a board replacement, sometimes it’s the housing that’s failed. We’ll diagnose which before we quote. Call (888) 300-3906 for a free estimate.
Yes. We do the electrical and safety work that goes with the operator, including safety edges and photo-eyes, so the install meets code. That’s part of any door or gate operator job we take on. Call (888) 300-3906 to talk through what your gate needs.
Call Us for Gate Repair in Whitney
If your gate is sagging, dragging, or just not closing the way it used to, the fastest way to get it sorted is to pick up the phone. Call (888) 300-3906 for a free estimate, and a live person will answer – day or night. We’ll give you a straight price, we’ll show up when we say, and we’ll fix what actually needs fixing instead of selling you a replacement. That’s the whole deal.
Written by the team at Gatewood Fence & Gate Spring Valley.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Whitney Customers Say
"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth