A Gatewood company - serving Spring Valley, NV
Gate Motor & Opener in Enterprise, NV | Gatewood Fence & Gate Spring Valley - Gatewood Fence & Gate Spring Valley

Gate Motor & Opener in Enterprise - Free Survey, One Written Price

Free on-site survey and a written price that includes the groundworks, the power run and the safety gear. Install date agreed before we order, and the system handed over tested and documented.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Motor & Opener Across Enterprise

If your driveway gate is stalling, reversing halfway, or tripping the breaker on a hot afternoon, you’re in the right place. We handle gate motor and opener work across Enterprise, NV – service calls for repairs, free estimates for new motor installations, and the wiring and post work that most operators need before the motor itself is even the problem. We know this part of the valley: the planned communities off Silverado Ranch and Somerset Hills, the corner lots where a builder hung a manual gate and someone later bolted on a motor. Call us at (888) 300-3906 and a live person picks up, day or night.

Call (888) 300-3906

Why Gatewood Fence & Gate Spring Valley Is Enterprise’s Preferred Gate Motor & Opener Company

Enterprise homeowners call us back because the work holds up and the price we say is the price you pay. The person who shows up is background-checked, and every job carries the 90-Day Done Right Promise in writing – if something we touched doesn’t work right, one call brings us back.

We answer the phone with a live person around the clock. No voicemail tree, no queue. When you call from a 89139 address after dinner because the gate won’t close, you reach someone who can talk you through whether it’s safe to leave open overnight.

Our technicians have up to 25 years of experience, and they’ve worked the nine major gate brands enough times to know which control boards fail quietly and which operators hold up in desert heat. We’re licensed and insured, and we quote the work and get your agreement before anything starts.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Motor & Opener Services in Enterprise

Enterprise is a newer part of the valley, and the gate work here is its own animal. It’s rarely a rusty antique. It’s a vinyl side gate or a wrought-iron driveway gate that needs to work reliably under 105°F summers, monsoon storms, and HOA eyes. Here’s what we do most.

Motor Installation in Enterprise

A motor installation in Enterprise usually costs $1,200 to $2,800 for a driveway swing or slide gate, depending on the operator and whether a power run is needed. Most of these gates were hung manual during the 1990s – 2000s build-out and automated later, so we check the hinge post footing, the gate’s balance, and the feed before quoting. The work is scheduled and measured, not rushed.

Motor Installation in Enterprise

Motor Repair in Enterprise

Repairs here run $180 to $650, and your best case is usually the operator itself rather than the whole gate. When a gate acts up, we look at post and hinge geometry first, then the operator. Control boards cooked by UV and heat, photo-eyes that fog and drift, and batteries that give out are all common calls in Enterprise, and we fix what’s actually broken. Our Gate Motor & Opener team handles the diagnostics either way.

Motor Repair in Enterprise

Linear Motor Service in Enterprise

Linear operators show up on plenty of Enterprise slide gates because they’re a solid choice for light residential use. We service and swap them, including the limit adjustments and safety reversing that keep them compliant. If a Linear unit has been fighting a misaligned rack, fixing the alignment often saves the motor.

Linear Motor Service in Enterprise

Slide Motor Repair in Enterprise

Slide gates in Enterprise grind and travel uneven when the rack has dropped out of mesh or the track has settled. That’s a geometry problem as much as a motor problem. We level the rack and pinion, check the roller carriage, and make sure the gate isn’t binding on its track before we blame the operator.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (888) 300-3906

Trusted Brands We Service in Enterprise

We’re certified on the brands that show up on Enterprise gates: Linear, Viking, Ghost Controls, and the other six we handle. We don’t stock parts on a truck or keep a warehouse, so turnaround depends on what the manufacturer can ship – usually quick, and we tell you the honest timeline up front. What we won’t do is swap a whole operator when a board or a limit switch fixes it. That’s the repair-first habit.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Motor & Opener Problems We See in Enterprise Homes

  • Builder-grade operators added after the fact. Here’s the local insight worth knowing: most Enterprise driveway gates were hung manual during the 1990s – 2000s build-out and automated later, so the operator often arrives to a gate whose hinge post footing was never sized for the added load. That’s why the post sags before the motor ever fails.
  • No dedicated power run or buried conduit. These homes were usually built without a 120V circuit or low-voltage conduit out to the gate line, so power gets tapped from a distant source and voltage drops under load. Sorting the feed is often step one.
  • Heat and UV cooking electronics. On a 110°F afternoon, control boards, photo-eyes, and batteries are the first to give out. The operator may test fine in the morning and fail by 3 p.m.
  • Monsoon-shifted posts in caliche and clay. Rare but intense downpours move posts set in expansive clay, and a gate that was plumb in June drags by September. Post and hinge geometry first, then the operator.

A typical Enterprise call goes like this: a swing or slide gate stalls, reverses mid-travel, or trips a breaker after a hot afternoon, paired with a shifted hinge post and a panel out of plumb. Because there was usually no conduit run to the gate, the pro has to sort the feed and low-voltage path first, then correct the post and hinge, set the operator, level the rack or arm, and verify the entrapment protection works.

Pricing for Gate Motor & Opener in Enterprise, NV

New motor installation in Enterprise runs $1,200 to $2,800, with the higher end when a power run and conduit are needed. Motor repair is $180 to $650. Battery backup add-on is typically $250 to $500. The quote is agreed before any work starts – the number on the estimate is the number on the invoice. We offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Estimates are free; call (888) 300-3906 for yours.

We Also Serve Cities Near Enterprise

We cover the neighborhoods around Enterprise too – Spring Valley, Paradise, Winchester, and Henderson. Same people, same pricing, same promise. If you’re just over the line in Enterprise or one town over, the answer is the same.

Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Motor & Opener in Enterprise

Why Enterprise Chooses Gatewood Fence & Gate Spring Valley

We set the standard for gate motor & opener in Enterprise.

30-60 Min Response

Fast dispatch across Enterprise. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Enterprise

Getting your gate motor & opener handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate motor & opener needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Enterprise - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate motor & opener pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Enterprise Customers Say

Trusted by homeowners across Enterprise and surrounding areas.

★★★★★

"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."

Salvador Arredondo
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg
★★★★★

"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."

Judith Stallworth

Ready for Gate Motor & Opener in Enterprise?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Enterprise.

(888) 300-3906

Request a Free Estimate in Enterprise

Tell us about your gate motor & opener needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch