A Gatewood company - serving Spring Valley, NV

Ghost Controls Gate Repair Service in Spring Valley, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Why Spring Valley Homeowners Choose Ghost Controls Gate Repair

We provide independent Ghost Controls gate repair in Spring Valley, NV. Ghost Controls builds DIY-oriented swing openers – the AX, TDS and DTP series – and most of the failures we see here come from undersized wiring, arm geometry that was set up wrong from day one, or solar and battery setups that never had enough headroom for the load. We’re not affiliated with or authorized by Ghost Controls. We’re an independent service provider that knows the product line, and we fix the cause instead of swapping boards until something works.

Call (888) 300-3906

Spring Valley is full of gates that hit the wall at the same time. The subdivisions were built in the 1980s through the 2000s boom, and the builder-grade swing operators behind those gates are now dying en masse. When a Ghost Controls arm starts fighting the gate, the arm usually isn’t the whole story. Call us at (888) 300-3906 and a live person answers, any hour.

Why Trust Gatewood Fence & Gate Spring Valley for Your Ghost Controls Gate Repair?

Ghost Controls isn’t a brand you can learn from a manual shelf. The AXS1 and AXS2 dual-arm units, the tube-style TDS1 and TDS2, and the DTP1 and DTP2 single-arm arms each have their own quirks, and our technicians have spent real time inside all of them. We’ve been locally owned and owner-operated since 2001, and our technicians have up to 25 years of experience – enough to know when a symptom is a board fault and when it’s a worn pivot bushing pretending to be a board fault.

We use OEM-compatible parts for Ghost Controls repairs: control boards, arm assemblies, limit switches and magnets. For wear items like batteries, remotes and solar regulators, quality aftermarket parts are fine and often cost less. That mix keeps the repair sound and keeps your warranty intact. Every job carries the 90-Day Done Right Promise in writing. One call brings us back if something isn’t right.

We handle nine major brands, so we’re not leaning on one product line to make a living. Ghost Controls is one part of what we service, and that means our advice on repair versus replace comes from what’s actually best for your gate, not what’s easiest to sell.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Common Ghost Controls Gate Repair Problems We Fix in Spring Valley

Here’s what we actually find on Ghost Controls units around here, matched to the model family, so you can narrow down what’s happening before you pick up the phone.

  • AX Series dual-arm out of sync (AXS1, AXS2). The secondary arm loses sync with the primary and the gate binds mid-travel. The cause is usually worn pivot bushings or loose mounting plates that changed the arm’s travel arc, not a bad board. Reset the limits without fixing the hardware and it drifts out again within weeks.
  • Control-board faults from moisture or reversed polarity. Intermittent open and close, or a keypad that’s simply dead. On solar and battery connections, reversed polarity is more common than people think, and moisture intrusion into the control box corrodes the board terminals. Spring Valley’s dry heat doesn’t prevent this – rare monsoon downpours and dust do the damage.
  • Limit-switch and magnet misalignment on TDS and DTP arms. The gate reverses or stops short. A post shift, a settled pilaster or seasonal ground movement throws that magnet off, and the arm reads the wrong position every cycle.
  • Remote and keypad pairing dropouts. Low battery voltage, corroded terminal blocks, or transceiver memory that’s been filled up over the years with old remotes. Pairing fails and owners assume the opener is shot. Often it’s a battery and a terminal block.
  • Solar and battery-backup kits under-delivering. We see a lot of undersized solar accessory setups that never kept the battery properly charged. In Spring Valley’s extreme heat, plenty of 100°F+ days bake the operator electronics and batteries on a heat cycle, so a system that worked in cooler months quits by June.

Here’s how a job like this usually goes. A typical Ghost Controls AXS2 dual-arm gate starts opening unevenly or reversing halfway because one arm’s limit magnet has shifted or the pivot bushing has worn, changing the arm’s travel arc. A qualified tech re-levels the gate, checks the mounting plates and pivot hardware, resets the limit positions for both arms, and verifies battery voltage and solar charging before re-pairing remotes and keypads. If the board shows corrosion or the arm is bent, the tech recommends replacing that arm or board rather than forcing a recalibration.

Ghost Controls Parts & Our Repair-vs-Replace Approach

Parts get sourced per job. We don’t claim a local stock of Ghost Controls boards and arms sitting on a shelf – the honest answer is that parts are matched to your unit and ordered for the repair. What we won’t do is patch a unit that’s past patching.

Our rule for Ghost Controls is straightforward. On a unit under about five years old, with sound wiring and posts, OEM control boards and arm assemblies are the right call. They’re made for that chassis and they behave. On wear items – batteries, remotes, solar regulators – quality aftermarket parts do the job and save you money.

When an AX or TDS arm is bent, or the board is corroded past a clean repair, replacing that arm or board is more reliable than trying to save it. Bending an arm straight again doesn’t restore the travel arc, and a corroded board will strand you in a month. We’ll tell you which side of that line you’re on before any work starts, and the price is quoted and agreed up front. Call (888) 300-3906 for a free second opinion on any written estimate.

Our Ghost Controls Service Process – Step by Step

  1. 1
    Diagnosis. We check the gate first, not just the operator. Post shift, hinge weld fatigue and pivot wear all show up as opener symptoms. Then we test the board, limits, battery voltage and solar charging on the Ghost Controls unit itself.
  2. 2
    Repair or install. For repairs, we replace the failed board, arm, limit switch or magnet with the right part for the AX, TDS or DTP family. For new installs, we size the wiring and arm geometry correctly so the unit isn’t fighting a gate it was never set up for.
  3. 3
    Test. Both arms on a dual-arm unit get their limits set and verified through full travel. We re-pair remotes and keypads after confirming battery health, and we run the gate under load, not just open and closed.
  4. 4
    Warranty. Every job ends with the 90-Day Done Right Promise stamped in writing. If it isn’t right, we come back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Products We Service & Install in Spring Valley

We service and install the full Ghost Controls swing opener family common across Spring Valley tract subdivisions. That includes the AX Series dual-arm openers (AXS1 and AXS2), the TDS Series tube-style swing openers (TDS1 and TDS2), and the DTP Series single-arm openers (DTP1 and DTP2). We also service Ghost Controls solar and battery-backup accessory kits.

We know these gates. Many Spring Valley driveway and courtyard gates sit on masonry pilasters and block walls, not wood posts, so hinge anchoring and wall-mount work differ from your typical suburban stock. A sagging iron gate on a block-wall pilaster often needs pilaster repair, not just a new hinge. New installs and accessory work are measured and scheduled – not same-day – with a written price before anything is ordered.

We Also Service These Brands

Ghost Controls is one of nine brands we service. We also work on LiftMaster, Mighty Mule and DoorKing gate operators and access control, along with FAAC, BFT, Linear, Viking and Elite. If you’re comparing a Ghost Controls repair against a different system, we can tell you straight which one fits your gate and your wiring.

FAQs – Ghost Controls Gate Repair Service in Spring Valley

Ghost Controls Repair Typical Range
Limit switch / magnet reset or replacement $150 – $280
Control board replacement $260 – $520
Single-arm replacement (TDS1, DTP1) $380 – $680
Dual-arm replacement (AXS2) $620 – $1,100
Solar / battery-backup service $180 – $420

These are typical ranges, not a quote. The price is quoted and agreed before any work starts, so there are no surprises at the door. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (888) 300-3906 for an exact quote – estimates are free.

Book Your Ghost Controls Service in Spring Valley, NV

If your AX, TDS or DTP opener is reversing, binding, losing remotes or running on a tired solar battery, call Gatewood Fence & Gate Spring Valley at (888) 300-3906. A live person answers any hour, and every job carries the 90-Day Done Right Promise in writing. Free estimates, upfront pricing, and a tech who shows up in the window we promised.

Written by the team at Gatewood Fence & Gate Spring Valley.

Need Gate Repair help nationwide? Licensed & insured · within the hour response · free estimates
Call (888) 300-3906
Local Service Coverage

Request a Free Estimate in Spring Valley

Tell us what you need - Gatewood Fence & Gate Spring Valley responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch