Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Before & After in Spring Valley, NV
Seeing the work speaks louder than any claim we could make on a page. Below are real gate repair situations we handle around Spring Valley: sagging driveway gates, motors that quit mid-cycle, hinges pulling out of the post, and welding jobs that never leave your driveway. Photos of finished work will go up here as we finish jobs and snap them. In the meantime, the write-ups below describe the repairs exactly as they come up in Spring Valley.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Recent Transformations
Sagging Driveway Gate Pulled Back to True Swing
Before
AfterThe problem: A wide dual-swing driveway gate had dropped so the panels scraped the ground, and the latch no longer lined up. The gate hadn’t sagged in the middle; the hinge post had started giving way. What we did: We reset and re-secured the hinge post, replaced the worn hinges, and re-hung the panels so they cleared and latched cleanly. The result: The gate swings and latches on its own again, and the homeowner doesn’t have to lift it to open it.
Automatic Gate Motor That Quit Mid-Cycle
Before
AfterThe problem: A LiftMaster swing operator stalled halfway and stopped responding. The homeowner’s first thought was a dead motor, but that wasn’t where it started. What we did: We checked the arm, travel limits, and control box, then traced it to a worn drive component and a limit setting that had drifted. We replaced the failing part and re-set the limits. The result: The gate cycles smoothly and reverses when it should, without a full motor swap.
Hinge Post Rotted at the Base
Before
AfterThe problem: A pedestrian gate was dragging and the hinge post moved every time it was pushed. The bottom of the post had rotted where it met the ground. What we did: We reset the post and brought the gate back to plumb rather than patching the panel. Fix the panel without the post and you’ll fix it twice. The result: The gate opens and closes with one hand, and the post holds solid.
On-Site Welding for a Broken Gate Frame

The problem: A tubular-steel ornamental gate had a cracked weld at a corner, so the frame racked and dragged. The homeowner expected it would have to be hauled away. What we did: We welded the frame on site so the gate stayed in the driveway, then braced and cleaned the joint. The result: The frame is rigid again and the gate moves true, with no haul-off and no waiting on a shop.
Sliding Gate Off Its Track

The problem: A sliding driveway gate had jumped its track and rolled rough, grinding as it moved. What we did: We replaced the worn roller carriages, cleared debris from the track, and re-aligned the gate so it travels straight. The result: It rolls quietly by hand and the opener no longer strains against the frame.
Want Results Like These?
If your gate is sagging, dragging, or the motor has quit, show us what it’s doing and we’ll tell you straight what it takes. Call (888) 300-3906 and a live person answers – day or night. We quote the price before any work starts, and every repair carries our 90-Day Done Right Promise in writing. Estimates are free. That’s what “the one down the road” means.
Written by the team at Gatewood Fence & Gate.
See the difference
Before
After
Before
After
Before
After