Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Enterprise
Gate installation in Enterprise, NV usually comes down to two things a neighbor rarely mentions: power and footings. Most homes here are 1990s – 2000s stucco builds inside master-planned communities, and the driveway gate was added after the house was finished. That means the operator is often running off a circuit that was never sized for it, and the conduit for loop detectors and safety photocells was never poured under the slab. We know Enterprise, from the corner lots off Silverado Ranch to the side yards tucked behind block walls in ZIP 89139, and we deal with those builder-era gaps on most jobs. Call (888) 300-3906 and a live person will pick up, day or night.
Why Gatewood Fence & Gate Spring Valley Is Enterprise’s Preferred Gate Installation Company
Our name is on the shop down the road, not on a billboard three states away. Enterprise homeowners have been burned by outfits that quote one number on the phone and another at the door, and we hear about it constantly. We quote upfront, agree it with you before a shovel touches dirt, and every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back.
Our technicians have up to 25 years of experience, and we’ve built a strong local reputation across Enterprise by fixing what other companies wanted to replace. We answer the phone with a live person around the clock, we’re certified to service nine major gate brands, and we carry background-checked, uniformed technicians on every job. When you call about a gate in Enterprise, you reach someone who can actually tell you what’s involved. Drive to the shop and look us in the eye if you’d rather.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Enterprise
Enterprise’s gate work skews toward newer planned communities, so installation means matching the build rather than tearing out old iron. Here’s what we set up most often.
Driveway Gate Installation in Enterprise
A new driveway gate in Enterprise is a power-and-footing job first. On lots built in the 1990s – 2000s, we usually find a single dedicated circuit that was never sized for a 1/2 HP operator, and no conduit run under the concrete for the loop detector or keypad. We run a new dedicated 20-amp circuit, trench conduit for the safety edges, and pour the post footing into caliche so it holds through monsoon season. Then we match the operator to the actual gate weight.

Sliding Gate Installation in Enterprise
Sliding gates fit the wider corner lots around Enterprise, where a swing gate would sweep into the sidewalk. The rack and pinion operator has to be matched to the panel weight or it grinds itself apart in the summer heat, and that’s where most after-market installs go wrong. We size the track and footing for the slab, not against it.

Swing Gate Installation in Enterprise
Swing gates are common on the tighter lots off Bermuda and Warm Springs, where setback space is short. The hinge post carries the whole load, so we start there rather than at the panel. A swing gate hung on a post that isn’t footed properly will sag within a season under our sun, and fixing the panel without the post means you’ll fix it twice.

Pedestrian Gate Installation in Enterprise
Side-yard pedestrian gates in Enterprise have to satisfy HOA CC&Rs for style and color when they face the street. We keep vinyl color codes and wrought-iron profiles on hand so the new gate matches the approved look. That single detail saves a lot of violations down the line.
Trusted Brands We Service in Enterprise
Enterprise homes run the usual mix of operators, and we’re certified to service all nine major brands. Linear and Ghost Controls show up most often on builder-era driveway gates, while Viking and DoorKing tend toward the heavier sliding and security setups on estate lots. We don’t claim to stock parts on a truck; instead we diagnose accurately and get the right parts fast, so you’re not waiting weeks on a special order. The brand matters less than whether the operator was matched to the gate and wired by someone who checked the circuit first, and that’s the part we get right.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Enterprise Homes
- Builder-grade operators on manual gates. A 1/2 HP unit bolted to a gate whose hinge post was never upgraded or footed properly burns out within a few seasons under 105°F+ heat. The opener gets blamed; the post is the real culprit.
- No conduit for safety devices. Without a trenched run under the driveway, loop detectors and photocells end up on exposed wiring that UV-degrades and eventually fails the entrapment protection the UL 325 standard requires.
- HOA color and profile mismatches. A replacement vinyl panel or iron section that doesn’t match the approved street-facing style triggers a violation. Enterprise CC&Rs are specific about both.
- Footings that shift in the soil. Posts set in expansive clay and caliche move during rare but intense monsoon downpours and flash flooding, throwing the gate out of alignment and dragging it across the driveway.
Pricing for Gate Installation in Enterprise, NV
Honest ranges for the Enterprise market: a typical pedestrian gate installation in Enterprise runs $450 – $1,200 depending on material and HOA matching. A basic swing or sliding driveway gate with a mid-range operator runs $2,800 – $5,500 for the gate and hardware. When the job needs a new dedicated 20-amp circuit, a trenched conduit run, and a poured footing in caliche, add roughly $800 – $2,200, since that’s the work a builder skipped. A heavier sliding gate with a LiftMaster or FAAC operator on a corner lot can reach $6,000 – $9,000. What moves the number most is power access and footing conditions, not the panel itself. Every price is quoted and agreed before any work starts, so the invoice matches the estimate. A free second opinion on any written estimate is standing, plus no trip charge inside the county and a permanent 10% discount for seniors and veterans. Call (888) 300-3906 for an exact quote.
We Also Serve Cities Near Enterprise
Enterprise sits close to a lot of our work, and we cover the neighboring communities too. Whether you’re in Enterprise or just over the line in Spring Valley, Paradise, Winchester, or Henderson, you can reach the same team for gate installation. Our Gate Installation crew handles the whole area, and a live person answers whenever you call.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Enterprise
Yes. A missing conduit run is common on 1990s – 2000s builder homes in Enterprise, and it doesn’t stop an automatic gate. We cut and trench a new conduit path for the loop detector, keypad, and safety photocells, then patch the concrete or route around the slab depending on the layout. We also add a dedicated 20-amp circuit at the garage, since the original single circuit usually wasn’t sized for a 1/2 HP operator. Call (888) 300-3906 for a free estimate.
Linear and Ghost Controls are common on Enterprise driveway gates, with Viking and DoorKing on heavier sliding and security setups. All hold up well when they’re matched to the gate weight and wired to a properly sized circuit. The failures we see aren’t brand failures; they’re undersized power and posts that were never footed. We service all nine major brands. Call (888) 300-3906 for a free estimate.
Often, yes. Enterprise’s master-planned communities put gate style and color for street-facing side yards into the CC&Rs. A gate that doesn’t match the approved vinyl color or wrought-iron profile can trigger a violation. We keep common vinyl color codes and iron profiles on hand and check the requirement before the first panel goes up. Call (888) 300-3906 for a free estimate.
Usually not. A gate that drags is almost always failing at the hinge post, not in the panel, and the fix is at the post and footing. Replacing the whole gate without addressing that just buys you the same problem in new material. We weld and repair on site rather than hauling it off. Call (888) 300-3906 for a free second opinion on any written estimate.
Most Enterprise gate installations run one to three days, longer when a new circuit, trench, and footing are involved. Because this is scheduled work, we give you a firm window and a written price rather than promising a same-day dispatch. On permits, Clark County and HOA approval requirements vary by community, and we’ll walk you through what your specific project needs before any work starts. Call (888) 300-3906 for a free estimate.
If you’re in Enterprise and thinking about a new gate, the smart move is to get the power and the footing scoped correctly from the start. Call (888) 300-3906 today for a free estimate – a live person answers, and the price we quote is the price you pay.
Written by the team at Gatewood Fence & Gate.