Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Paradise
Most gate work in Paradise isn’t a homeowner swapping a hinge on a Saturday. It’s a pool enclosure gate, a parking garage arm, or a back-of-house service gate that belongs to a building, an HOA, or a resort. We work on those gates in Paradise every week, and we know the difference between patching a panel and fixing the post it hangs from. That distinction matters more here than almost anywhere.
We cover Paradise directly, including the 89105 corridor along the resort side and the condo buildings that line it. A live person answers the phone at (888) 300-3906, day or night, and you’ll get a straight answer about whether the gate needs a weld, a roller, or a whole new hinge post before anyone picks up a torch.
Why Gatewood Fence & Gate Spring Valley Is Paradise’s Preferred Gate Parts & Welding Company
Paradise readers tend to come to us one of two ways: a property manager who needs a gate fixed inside a tight work window, or a resident in a condo building who’s tired of hearing the slide gate grind every morning. Either way, they’re calling because a company that shows up, welds on site, and puts the promise in writing on the invoice is worth keeping the number for.
We’re locally owned and owner-operated since 2001, with a published address and license number anyone can look up. The 90-Day Done Right Promise is stamped on every job, not buried in fine print – if something we touched isn’t right, one call brings us back. Our technicians have up to 25 years of experience, and we’re certified to service nine major gate brands, including LiftMaster, FAAC, Linear, and Viking.
Response time to Paradise is fast because it’s close and because the gates here aren’t exotic – they’re heavy metal frames, roller assemblies, and hinge posts that have been cycled to death. We’ve seen enough of them that we can usually tell you what’s wrong from the phone description alone. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Paradise
We keep a gate working where it sits. That means welding and hardware work on site, not hauling a security gate off for a week while a parking garage stays half-shut. Our Gate Parts & Welding team handles the full range below.
Hinge Replacement
A sagging swing gate in Paradise almost always has a story, and it’s rarely in the middle of the gate. The hinge post pulls in its footing, the hinges wear oval, and the panel drops a quarter inch that turns into two. We replace hinge hardware properly and check the post while we’re in there, because a new hinge on a loose post buys you a few months at best.

Post Replacement
Post replacement on a 89105 parking garage or service-yard gate means working around concrete, rebar, and a building that still needs vehicle access. We set the new post right, weld the frame back to it with the gate squared, and stage the work so vehicles and pedestrians keep moving through the day.

Rail Repair
Rail joints and rack-and-pinion on a slide gate take a beating when a resort cycles one hundreds of times a day. We re-weld cracked rail sections and replace worn pinion gear where welding won’t hold, then re-test the operator against the repaired track. A rail fix on a shared driveway in Paradise is a weld, not a swap.

Custom Welding
When a gate’s been hit by a truck or a building needs a reinforcement gusset, we fabricate and weld on site. Custom welding on a shared-property gate in Paradise usually means matching the original spec so the HOA or resort sign-off clears without a second trip.
Trusted Brands We Service in Paradise
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On the resort side, LiftMaster and FAAC control boards take the worst of the summer heat, and BFT and Linear operators are common on parking and slide gates. We don’t stock parts – we source them to the correct spec and get them to Paradise fast, usually within a day or two of diagnosis. When a control board has to be ordered, we tell you exactly what’s coming and when.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Paradise Homes
- Dust-choked rollers on a slide gate. Desert dust on a narrow shared driveway grits up the rollers and slide track until the panel binds and the operator strains or trips out. Cleaning and re-aligning the rollers beats replacing the operator almost every time.
- Heat and UV cooking control boards and rubber seals. A pool-enclosure or parking-garage gate that never gets shade bakes its LiftMaster or FAAC board and seals through a Paradise summer. We see operator failures here clustered in July and August.
- A hinge post pulling loose in its footing. A heavy metal swing gate on a shared entry puts load on the post, not the panel. Sag that a panel-only repair won’t cure almost always traces back to the footing.
- Rack and pinion wearing fast on a service-yard gate. Back-of-house gates cycled hundreds of times a day wear rack and rail joints faster than the resort’s maintenance calendar accounts for. We plan the weld or gear swap around the actual duty cycle.
Pricing for Gate Parts & Welding in Paradise, NV
Real numbers for the Paradise market: a typical roller and track service on a slide gate runs $180 to $350. A hinge replacement set on a swing gate runs $220 to $450 depending on hinge style and how much hardware has to be cut out and re-welded. Post replacement on a shared-property metal frame runs $650 to $1,400. Custom on-site welding for a rail, gusset, or hit repair runs $250 to $600. What pushes any of these up: heavier rolling gates, concrete work at the post, and resort sign-off or work-window constraints.
Every price we give is quoted and agreed before any work starts. You’ll never get an invoice bigger than the estimate – that’s the whole point of a free, written estimate. We also give a free second opinion on any written estimate you’ve already got, and a $40 discount applies to any repair over $200.
We Also Serve Cities Near Paradise
We handle gates across the neighborhoods around Paradise too – Winchester, Whitney, Spring Valley, and Enterprise. If you’re on the edge of the 89105 line and not sure whether you’re in our zone, call and we’ll tell you straight. Our Gate Parts & Welding in Paradise page covers the local approach; the same crew covers the surrounding cities.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Paradise
Yes – we stage the work so access stays live. On a shared driveway or back-of-house service yard, we work in phases, keeping at least the pedestrian path open and often the keypad entry active throughout. On resort-side gates we coordinate the work window with property security so vehicle traffic keeps moving and the building never loses its gate entirely.
It’s usually a roller problem, at least first. Dust-laden air in Paradise grits up the rollers and slide track, the panel binds, and the operator strains trying to push through the friction. We check rollers and track first, then look at the rack and rail joints for worn or cracked welds. Fix the friction before you blame the operator. Call (888) 300-3906 for a diagnosis – estimates are free.
Because the sag lives in the hinge post, not the panel. On a heavy metal swing gate in 89105, the post pulls in its footing under load, and re-hanging the panel on a loose post just delays the same sag by a few months. We check the footing and post plumb before touching hinge hardware. It’s the difference between a fix and a repeat visit.
The property’s HOA or resort operations and security team does, against their spec sheet. Almost every gate in 89105 is shared property, so parts and welding decisions get approved against an engineered spec rather than a single owner’s preference. We document the repair, match the original spec where it matters, and provide what the property needs for sign-off, so the work clears without a second trip.
Yes, and we re-test them before releasing the gate. After any parts or welding work on an automatic gate, we test the safety photocells and entrapment protection, then confirm the gate cycles correctly for the property. A repaired gate that closes without working safety sensors isn’t actually fixed – especially on a shared driveway or pool enclosure where people walk through every day.
If a gate in Paradise is dragging, sagging, or tripping its operator, call (888) 300-3906. A live person answers around the clock, the estimate is free and written, and the price is agreed before we lift a tool. The name is on the shop and the promise is on the invoice.
Written by the team at Gatewood Fence & Gate Spring Valley.