Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Las Vegas
If a gate in Las Vegas has started to sag, catch, or grind, you probably already know something underneath it has moved. That’s usually true. Most yard gates in Las Vegas are anchored into caliche and masonry-block walls, and the footing is the part that fails first, not the panel. We repair gates right where they hang – welding on site, resetting posts that cracked at the soil line, replacing hinges instead of replacing the whole gate. A live person answers the phone at (888) 300-3906, day or night.
Why Gatewood Fence & Gate Spring Valley Is Las Vegas’s Preferred Gate Parts & Welding Company
People in Las Vegas call us because they want a name they can check and a crew that shows up when they said they would. Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise in writing – if it’s not done right, we make it right. No fine print, no “in most cases.”
We know this ground. The tract homes on the west and northwest side – out around 89149 and 89131 – have gates all hitting the same 15-to-20-year failure window at once, so we see the same cracked hinge posts and torqued welds over and over. We also know what a hundred-degree summer does to a wood panel and what a single monsoon does to a gate that was swinging fine the week before.
Pricing is quoted and agreed before any work starts, so the number you hear is the number on the invoice. Seniors and veterans get a permanent 10% discount, and there’s no trip charge inside the county. If you’ve got a written estimate from someone else, we’ll give you a free second opinion on it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Las Vegas
Hinge Replacement in Las Vegas
A gate sags at the hinge post, not in the middle, and that’s where we start. On Las Vegas block-wall side gates, the hinges take the wind load from solid infill panels, so the weld at the hinge plate opens a crack that widens with every storm. We cut out the failed plate, weld a new one on site, and check the post underneath before we call it done. Fix the hinge without checking the post and you’ll fix it twice.

Post Replacement in Las Vegas
This is the job most people don’t know they need. Posts set down into caliche crack at the soil line after a few 100°F+ summers, and flash-flood runoff undercuts those same footings, which is why one monsoon can leave a gate binding out of nowhere. We reset or replace the post and anchor, working with the masonry pillar or wall it ties into. Our technicians keep hinge plates and post anchors on hand as standard stock, because around here it’s rarely just the hinges.

Rail Repair in Las Vegas
Monsoon microbursts put real wind load on a solid-infill gate, and that load torques the rails and the rail-to-stile joints. When a rail joint cracks, we re-weld it or replace the rail rather than patch over it. On sliding gates we also check the track, since dust and grit pack in and fight the rollers.

Custom Welding in Las Vegas
Gates get hit, bent, and modified over the years, and sometimes the fix is a weld, not a new gate. We do custom welding on site – brackets, stops, hinge plates, rail sections, tie-ins to block walls – so the gate stays in your driveway. If you want a look at the full range of what we handle, see our Gate Parts & Welding services.
Trusted Brands We Service in Las Vegas
We’re certified to service nine major gate brands, including BFT, Linear, Viking, and Ghost Controls. That matters on repair calls because a binding gate can fool you – sometimes it’s the hardware, sometimes the operator is stalling because the gate is out of true. We don’t claim a stocked parts warehouse; what we do is diagnose right the first time and get the part you need without guesswork. When an operator is involved, we re-mesh the rack and pinion and test the safety photocells on the same visit.
Common Gate Parts & Welding Problems We See in Las Vegas Homes
- The hinge post cracks at the soil line. After several summers over 100°F, the post where it meets the caliche footing lets go, so the gate sags even though the panel and hinges look fine. It’s the footing, not the panel.
- Monsoon dust and runoff pack into hinges and tracks. Grit and flash-flood runoff jam the hinge side and slide-gate tracks, binding the gate and stalling the operator or burning out its battery.
- Wind load torques solid-infill gates. Microbursts push on a solid panel, opening cracks at the hinge plates and rail joints on masonry-pillar side gates, and each storm makes them a little worse.
- Builders’ hardware on newer west-side gates. The 2000s-and-later builds out toward 89144 and 89131 often carry builder-grade sliding operators that wear faster here than the gate itself.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Las Vegas, NV
Here’s roughly what this work runs in Las Vegas. Hinge replacement typically lands around $150-$300 per gate, post replacement and footing reset $350-$900 depending on how deep the caliche goes, rail repair $120-$280, and custom welding $100-$250 by the job. On an operator gate, re-meshing the rack and pinion and testing the safety photocells usually adds $100-$200. What moves the number is access to the post, whether the footing needs rebuilding, and how much rust or bent metal we’re working around.
Every price is quoted and agreed before any work starts. There’s $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Call (888) 300-3906 for an exact quote.
We Also Serve Cities Near Las Vegas
We work gates all around the valley, including Winchester, North Las Vegas, Sunrise Manor, and Paradise. The same caliche-and-block-wall problems show up across those lines, so the repair is the same whether you’re inside Las Vegas or just over the border. If you’re nearby, mention where you are when you call and we’ll tell you what to expect.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Las Vegas
In Las Vegas it’s usually the post, not the hinges. Posts set in caliche crack at the soil line after repeated 100°F+ summers, so the gate drops and sags even though the hinges still look solid. A technician checks the hinge post first, then the hinges, because replacing hinges on a cracked post won’t hold. Call (888) 300-3906 and we’ll get eyes on it – estimates are free.
Use the manual release on the operator, then move the gate slowly by hand. Most residential operators have a key-and-handle release on the housing, or a lever you flip to disengage the drive so the gate swings free – check the operator manual for your brand, since BFT, Linear, Viking, and Ghost Controls each do it a little differently. Don’t force it if it won’t move; a binding gate should be checked before you pull on it. Call us if the release won’t engage.
Monsoon microbursts drive grit and runoff into the hinges and tracks, and flash-flood runoff can undercut the footing, so a gate that swung fine last week suddenly binds. On solid-infill gates, the wind load also torques the panel and the rails. It’s worth having it looked at rather than muscling it – call (888) 300-3906 for a free estimate.
Yes. A solid panel catches far more wind than a picket or open design, so the hinge plates, rail joints, and post anchors have to carry that load through monsoon season. We weld heavier hinge plates and check the footing to match. If you’re not sure what your gate has, we’ll take a look.
An automatic gate should have working safety photocells at the closing edge, plus a proper manual release, and most residential operators also need a reversing or sensing feature. We test the photocells on every operator call and re-mesh the rack and pinion so the gate moves true. If your gate is missing safety gear or it isn’t working, call (888) 300-3906 – that’s a safety issue worth fixing now.
Get Your Las Vegas Gate Fixed Right
If your gate is sagging, binding, or cracked at the post, don’t wait for the next storm to make it worse. We weld on site, reset what’s cracked, and stand behind the work with the 90-Day Done Right Promise in writing. Our technicians have up to 25 years of experience, there’s no trip charge inside the county, and pricing is always agreed up front. Call (888) 300-3906 for a free estimate on gate parts and welding in Las Vegas.
Written by the team at Gatewood Fence & Gate.