Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Henderson
If your gate is dragging, sagging, or swinging open on its own, we can fix the hardware that’s causing it, and we weld on site so the gate stays in your driveway instead of disappearing into somebody’s shop for a week. Our technicians have up to 25 years of experience, and we bring that to Henderson homes from Green Valley down to the older blocks off Boulder Highway. We’re careful about one thing above all: a gate sags at the hinge post, not in the middle, and that’s where we start looking. Call (888) 300-3906 and a live person picks up, any hour, any day.
Why Gatewood Fence & Gate Spring Valley Is Henderson’s Preferred Gate Parts & Welding Company
We’re locally owned and owner-operated, with a published address and license number anyone can look up. When you hire us for a weld, a hinge set, or a new post footing, you’re working with a shop that stands behind every job with the 90-Day Done Right Promise in writing. If it’s not done right, we come back and make it right. No phone tag, no runaround.
Henderson customers call us for a reason that shows up again and again: they’ve been burned before by a national outfit that quoted one price on the phone and charged another at the door. So we do it differently. Upfront pricing, agreed before any tool comes out of the truck. A $40 discount off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Seniors and veterans get 10% off permanently, no haggling required.
We know Henderson’s gate problems up close. The master-planned communities here – Green Valley, Anthem, Seven Hills, MacDonald Ranch – all have their own hardware expectations and finish requirements, and the original gates in those neighborhoods are now old enough that the parts are starting to fail in patterns. That’s the kind of knowledge that saves you a wasted call.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Henderson
We focus on the hardware that actually fails on Henderson gates: hinges, posts, rails, and welds. Here’s what that looks like in practice.
Hinge Replacement in Henderson
A gate sags at the hinge post, not in the middle. In Henderson’s Seven Hills and Anthem hillside lots, settling soil and retaining-wall movement throw hinge posts out of plumb over time, and the gate starts dragging, binding, or self-swinging. We replace worn hinges and re-plumb the post where needed so the gate swings true again. Fix the panel without the post and you’ll fix it twice.

Post Replacement in Henderson
When a post is cracked, rotted at the base, or leaning from years of monsoon-season wind, patching it usually doesn’t hold. We set a new post with a proper footing so the gate hangs square and stays there. On Henderson’s sloped driveways in Seven Hills and Anthem, we check the footing depth and plumb before we hang anything off it, because a downhill slope puts extra stress on the post that a flat lot never sees.

Rail Repair in Henderson
Builder-grade wrought-iron and vinyl gates from the 1990s and early 2000s are hitting the 15-to-25-year mark in places like Green Valley and MacDonald Ranch, and the rails are often the first thing to rust through or crack. We repair bent or broken rails and re-weld the joints so the gate holds its shape. Matching the existing look matters when your HOA has a say, so we check the finish before we touch it.

Custom Welding in Henderson
Some gate problems aren’t a part swap at all – they’re a custom bracket, a re-welded hinge plate, or a reinforcement on a gate that’s been dragging for years. We weld on site, which means your gate never leaves the property. For Henderson gates under HOA architectural review, we can match the existing finish and hardware spec so the repair passes inspection without a second round of paperwork.
Trusted Brands We Service in Henderson
We work on the major gate operators you’ll find in Henderson homes and community gates: LiftMaster, FAAC, BFT, Ghost Controls, Linear, Viking, DoorKing, Elite, and Mighty Mule. We don’t keep a stock of parts on hand, and we won’t pretend otherwise. What we do is diagnose fast, source the right replacement, and get it in quickly. If your BFT or Ghost Controls operator has quit after 15 or 20 years, we’ll tell you straight whether it’s a board, a gear, or something simpler – before you spend money on a new motor you didn’t need.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Henderson Homes
Henderson gate failures follow patterns. Here’s what we see most often in this city.
- Builder-grade operators quitting at 15 – 25 years. The original operators in 1990s and 2000s tract homes in Green Valley and MacDonald Ranch are burning out their control boards or stripping gears, and a replacement usually means upgrading to modern UL 325 entrapment protection rather than swapping like for like.
- No power at the gate. Most gates in Henderson’s newer subdivisions were installed manual, so adding automation later means trenching a conduit run from the house or panel – work that should have been done during the build and usually wasn’t.
- Hinge posts out of plumb on hillside lots. Settling soil and retaining-wall movement in Seven Hills and Anthem throw posts off true, and the gate starts dragging or swinging on its own. Flat lots in Green Valley rarely see this.
- Finish cracking and hardware bake-out. 100°F-plus summers and intense UV dry and crack gate finishes and foul tracks and hinges with monsoon-season dust. South- and west-facing gates fail years before shaded ones, so an exposed driveway gate often needs hardware replaced first.
Pricing for Gate Parts & Welding in Henderson, NV
Here’s what gate work in Henderson actually runs, so you know roughly what to expect before we arrive.
| Job | Typical Henderson Range |
|---|---|
| Hinge replacement (per hinge, plus labor) | $75 – $200 |
| Post replacement with new footing | $350 – $850 |
| Rail repair or re-weld | $150 – $400 |
| Custom welding (bracket, plate, reinforcement) | $120 – $500 |
| Gate rollers or latch & lock replacement | $100 – $300 |
What pushes a job higher: hillside footing work on a sloped Seven Hills driveway, HOA finish-matching on a powder-coat repair, or a post that needs full replacement rather than re-plumbing. What keeps it lower: a simple hinge swap on a flat Green Valley lot. Before any work starts, we quote it and you agree to it. The price we say is the price you pay. Estimates are free, and we’ll give you a free second opinion on any written estimate you already have. Call (888) 300-3906 for an exact quote.
We Also Serve Cities Near Henderson
We work beyond Henderson’s city limits too – Boulder City, Whitney, Paradise, and Enterprise, plus the neighborhoods around them. Same pricing approach, same 90-Day Done Right Promise in writing. If you’re just outside the Henderson line, call anyway; we’ll tell you straight whether we can get to you. You can also read more about our Gate Parts & Welding service or check our coverage for Henderson.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Henderson
You can usually replace it with a modern unit, but often only after upgrading the safety side of the system. Most operators that old don’t have modern UL 325 entrapment protection, so a straight swap isn’t compliant and won’t pass inspection. We check the existing wiring and power first, then quote the operator plus the required photocells or safety edges. Call (888) 300-3906 and we’ll walk you through what your specific gate needs.
Expect a power run and trenching, because most manual gates in Green Valley were installed without conduit to the gate location. We check whether there’s any existing power at the gate, and where there isn’t, a new conduit run from the house or panel is part of the job. That run is often the bigger piece of the project. Call us for a free estimate and we’ll measure it before we quote it.
Hillside lots settle differently, and that’s usually the answer. In Seven Hills and Anthem, soil settling and retaining-wall movement throw hinge posts out of plumb, so the gate drags, binds, or self-swings. Flat-lot subdivisions in Green Valley rarely see this. The post is where we start looking, not the panel. Call (888) 300-3906 for an exact quote on re-plumbing the post.
In most cases, yes. We check the existing finish and hardware spec first, then match the powder coat and hardware so the repair passes HOA architectural review. Because so much of Henderson’s gate work runs through Green Valley, Anthem, Seven Hills, and MacDonald Ranch association rules, we’re used to working with the spec rather than around it. Call us to talk through your association’s requirements before we schedule.
Look for photocells or safety edges at the gate and check the manual for a UL 325 rating – if you can’t find either, it’s worth having a pro check before someone gets hurt. This matters most on automatic gates in Henderson’s family-heavy subdivisions, where a child or a pet can get caught in a closing gate. A trained technician can confirm the safety setup and quote any updates. Call (888) 300-3906 for a free estimate.
Written by the team at Gatewood Fence & Gate.