Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Enterprise
If your side-yard gate is dragging, your post has shifted, or a weld finally gave out, we can help. We handle Gate Parts & Welding across Enterprise and know this part of the valley well, from the stucco tract homes off the 89139 side of town to the corner lots where automatic driveway gates are common. Most repair calls in Enterprise get a visit fast, and we answer the phone with a live person around the clock. Call (888) 300-3906 for a free estimate.
Why Gatewood Fence & Gate Spring Valley Is Enterprise’s Preferred Gate Parts & Welding Company
Enterprise is a master-planned suburb, and we’ve spent years learning how its gates fail. That familiarity matters. A vinyl gate that’s fading on one side of a block wall and a wrought-iron panel that won’t swing true after a monsoon need different parts and different approaches, and we know the difference before we pull up.
We’re locally owned and owner-operated, which means a name on the shop and on every invoice, plus a 90-Day Done Right Promise in writing on every job. Calls are answered by a live person 24/7, not a voicemail or a queue. If a repair goes sideways, one call brings us back.
Our technicians bring up to 25 years of experience and are background-checked, so you’re not letting a stranger into your side yard. Since 2001 we’ve built a reputation on repair-first work: we fix the gate where it stands rather than hauling it off or swapping parts that don’t need swapping. Enterprise customers get the same upfront pricing, quoted and agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Enterprise
Most of what we do in Enterprise comes down to keeping a gate swinging square when the heat, the soil, and the years all work against it. Here’s where we spend the most time.
Hinge Replacement in Enterprise
Enterprise gates sag at the hinge post, not in the middle, and that’s where we start. Builder-grade hinges from the 1990s and 2000s build-out wear out faster under the desert heat, and a tired hinge lets a gate drop and drag. We replace hinges on site and check the post footing while we’re there, since fixing the hinge without the post means you’ll fix it twice.

Post Replacement in Enterprise
Expansive caliche clay and the occasional hard monsoon are rough on posts set shallow. When a footing creeps, the gate sags and owners often blame the latch. We reset or replace post footings so the gate hangs true again, and we keep an eye on the block-wall alignment that Enterprise lots depend on.

Rail Repair in Enterprise
A bent or broken rail on a wrought-iron panel is usually fixable without replacing the whole gate. We straighten, re-weld, and re-hang rails to match the original profile, which matters here because HOA rules on street-facing side yards require panels that match the neighborhood. A mismatched rail can trigger a violation.

Custom Welding in Enterprise
We weld on site, so the gate stays in your driveway instead of disappearing into a shop. Custom welding covers anything from a cracked frame to a fabricated bracket that fits an older gate. With the UV and heat in Enterprise, metal fatigues and welds crack; on-site welding means we fix it in a visit rather than a haul-away.
Trusted Brands We Service in Enterprise
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Many of the operators in Enterprise are builder-grade LiftMaster or Linear units from original construction, and a good share of newer additions run on BFT, Linear, or Ghost Controls hardware. We don’t claim to stock parts locally; what we do is diagnose the fault and get the right component fast. If a panel or operator needs sourcing to match your HOA’s color and style, we’ll tell you the lead time upfront rather than leaving you guessing.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Enterprise Homes
- Builder-grade operators failing under the heat. Original LiftMaster and Linear units from the 1990s and 2000s often start stalling or reversing after several summers above 105°F, and many were never fitted with the photo-eyes or edge sensors that entrapment protection requires.
- Automation bolted onto a manual gate. Because most Enterprise gates were hung as manual swing gates, adding an operator later often means there’s no dedicated 120V circuit or low-voltage conduit at the gate, so the unit runs on an extension cord or an intermittent supply.
- Hinge post creep in caliche clay. Expansive soil plus a rare hard downpour can shift a footing enough to throw a gate out of plumb, which owners read as a hinge or latch problem when the real issue is underground.
- UV-faded vinyl and cracking welds. Intense sun breaks down vinyl color and paint and fatigues iron welds over time, and a faded or cracked panel against a block wall is exactly what draws HOA letters in a master-planned neighborhood.
Pricing for Gate Parts & Welding in Enterprise, NV
The one thing that makes Enterprise different is the retrofit reality. Most gates here were built manual, so when automation is added, a power and conduit run is usually part of the project. On a typical Enterprise corner-lot driveway, a builder-grade operator starts stalling after several 105°F-plus summers, and the homeowner finds no loop detector or safety photocell. A qualified tech usually traces that to a tired operator, a hinge post whose footing has crept, or a rack and pinion out of mesh, then does sag correction and resets the post footing before touching the panel.
Here’s what those jobs run in Enterprise’s market:
- Hinge replacement: typically $150 – $300 per hinge set, depending on panel weight and how many hinges we replace.
- Post replacement or footing reset: usually $400 – $1,200, depending on depth, soil, and whether the block wall needs realignment.
- Rail repair and re-weld: generally $180 – $450.
- On-site custom welding: commonly $200 – $600.
- Power and conduit run for a newly automated gate: often $600 – $1,500, depending on distance and trenching.
Those ranges move with gate size, material, and access. What doesn’t move is this: we quote the price and agree on it before any work starts, and there’s no trip charge inside the county. We also offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (888) 300-3906 for an exact quote – estimates are free.
We Also Serve Cities Near Enterprise
We take care of gate work beyond Enterprise too. If you’re just over the line, we also cover Spring Valley, Paradise, Winchester, and Henderson – all a short drive from Enterprise. Same upfront pricing, same written guarantee, same live answer on every call. Reach out and we’ll get you scheduled for a look at your gate.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Enterprise
Because the sag almost always starts at the hinge post footing, not the hinges. In Enterprise’s expansive caliche clay, a post set shallow can creep after a monsoon or a long hot stretch, and tightening hinges only masks it until the next shift. The fix is resetting or replacing the footing so the gate hangs plumb again. Call (888) 300-3906 for a free estimate.
Check the power supply and the entrapment protection first. Many Enterprise gates were built manual, and later automation often runs without a dedicated 120V circuit or low-voltage conduit, plus a missing photo-eye or edge sensor. A qualified tech should confirm a real dedicated circuit and UL 325 safety devices before trusting the operator. Call (888) 300-3906 to schedule an inspection – estimates are free.
Yes. Enterprise HOA CC&Rs require specific gate styles and colors for street-facing side yards, so we match vinyl color codes and iron profiles rather than dropping in a mismatched panel. Lead time depends on the profile, and we’ll tell you upfront. Call (888) 300-3906 for a free estimate.
We’re certified to service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Original builder-grade LiftMaster and Linear units are common in Enterprise, and newer additions often run BFT, Linear, or Ghost Controls hardware. Call (888) 300-3906 to confirm your model – estimates are free.
Because of the heat and sun. Enterprise summers routinely top 105°F, and intense UV breaks down vinyl, paint, and operator components faster than in milder climates. Most failures trace back to that, not to a bad install. Call (888) 300-3906 for a free estimate on repair or replacement.
Written by the team at Gatewood Fence & Gate.