Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Henderson
If your driveway gate in Henderson has started stalling halfway open, reversing for no reason, or refusing to move at all, a trained gate motor tech can usually diagnose it in a single visit. Most Henderson gate and opener work runs $185 – $540 depending on the motor and the fix. We know this city block by block – Green Valley, Seven Hills, Anthem, down to the older homes near Boulder Highway – because Henderson’s gate problems mostly aren’t the same problems you’d find in a flat, non-HOA town. Call (888) 300-3906 and a live person picks up, day or night.
Why Gatewood Fence & Gate Spring Valley Is Henderson’s Preferred Gate Motor & Opener Company
Henderson residents have plenty of choices when a gate operator quits, and the ones who’ve been burned by a big national outfit tend to want something simpler: a name they can look up, a price agreed before anyone touches the gate, and someone who actually shows up. That’s what we do. Our technicians have up to 25 years of experience, and every job in Henderson carries the 90-Day Done Right Promise in writing – if it’s not done right, one call brings us back.
We’ve worked enough Henderson gates to know the neighborhood patterns. Green Valley and Anthem gates get hit hard by afternoon sun. Seven Hills and Anthem hill lots have sloped driveways where settled posts make a gate drag. MacDonald Ranch projects usually mean matching an HOA-approved design. That local working knowledge saves you a return trip. The name is on the work, the pricing is quoted upfront, and Henderson-area calls don’t come with a trip charge inside the county. Our technicians are background-checked, and we answer the phone around the clock rather than routing you to voicemail.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Henderson
Motor Repair
Most Henderson motor failures we look at aren’t dead units – they’re tired ones. A builder-grade LiftMaster or Linear operator on a 15 – 25 year old wrought-iron slide gate starts reversing randomly or stalling mid-travel. The real cause is often sun-baked control board components, dust-fouled rack and pinion, and a hinge post that has shifted a little. A good Henderson pro verifies safety photocell function first, then checks the post footing and track alignment before recommending repair versus replacement. Repair-first, always – if the board and gearbox are still sound, we fix what’s there.

Slide Motor
Henderson’s tight lots are exactly why sliding gates are so common here – a slide gate needs no swing clearance into a shared driveway or a right of way, which matters on the narrower parcels off Horizon Ridge and around the older Basic-area streets. We service and replace slide gate operators from Linear, Viking, and BFT, and we check rack alignment, ground clearance, and the safety edges before we ever call it a motor problem.

Motor Installation
New operator going in? This is measured, ordered, and scheduled work – we don’t promise same-day installs, because a proper replacement means matching the motor to the gate’s actual weight and length, confirming the power run, and getting the wiring right. In Henderson’s HOA communities, that install also has to satisfy the association’s hardware spec. You get a free on-site measure and a written price before anything is ordered.

Battery Backup
When the power drops in Henderson – and monsoon season brings its share of outages – a gate with a dead battery backup either stays locked open or won’t open at all. We test and replace backup batteries, confirm the operator charges correctly, and make sure the manual release actually works. If your gate is your only vehicle access, this is the part you don’t want to skip.
Trusted Brands We Service in Henderson
We’re certified to service nine major gate brands, and the ones we see most in Henderson are LiftMaster, Linear, Viking, BFT, Ghost Controls, DoorKing, Elite, FAAC, and Mighty Mule. We don’t claim to keep parts in stock locally – what we do is diagnose accurately the first time and order the right part for your exact unit, so you’re not paying for a swap that didn’t need to happen. For a brand-specific repair, tell us the model when you call and we’ll tell you what to expect. Fast turnaround, honest answers on what’s worth fixing.
Common Gate Motor & Opener Problems We See in Henderson Homes
- Control board failure from heat and UV. South- and west-facing gates in Green Valley and Anthem take 100°F+ summers and relentless sun, and the control board is usually the first thing to go. A gate that reverses randomly in the afternoon is a classic heat-related symptom, not a mystery.
- Rack and pinion jammed with monsoon dust. Wind-blown dust and debris settle into the slide gate track and rack, and the operator starts straining or reversing under the load. A good cleaning and alignment often fixes what looks like a dead motor.
- Hinge post settlement on sloped driveways. In Seven Hills and Anthem’s hillside lots, settling soil and retaining-wall movement throw gate posts out of plumb, so the gate drags or self-swings. Fix the motor without fixing the post and you’ll fix it twice.
- HOA-spec hardware mismatches. In the master-planned communities, a like-for-like replacement can still fail architectural review if the hardware or finish isn’t association-approved. Get the spec first, or you’ll wait on color-matched powder coat.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Motor & Opener in Henderson, NV
Here’s what Henderson gate work actually tends to run, quoted before any work starts so there’s no surprise on the invoice:
- Motor repair / diagnostic: $185 – $340 typical, depending on the board or gearbox work needed.
- Slide motor replacement: $480 – $1,100, driven mostly by gate weight and operator brand.
- Battery backup replacement: $150 – $280.
- Intercom / keypad integration: $220 – $650 depending on the system.
What moves the price is gate weight, whether the post needs work, and HOA finish requirements. A photo of the operator helps us quote closer on the phone. Free estimate on the spot, and $40 off any repair over $200.
We Also Serve Cities Near Henderson
Henderson sits close to a lot of neighbors, and we take gate motor and opener calls across Boulder City, Whitney, Paradise, and Enterprise as well. If you’re just outside Henderson city limits, the same upfront pricing applies. Call and we’ll confirm your area and get a free estimate scheduled.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Henderson
Yes, in most cases – a motor or opener replacement that matches the association-approved spec usually avoids full architectural review, but the hardware and finish have to comply. In Henderson’s HOA-governed communities like Green Valley, Anthem, Seven Hills, and MacDonald Ranch, changes to visible gate hardware or color can trigger review, so it’s worth confirming the approved spec with your HOA board or property manager first. We work with HOA boards regularly and can match color-matched powder coat and spec hardware so your replacement clears review. Call (888) 300-3906 for a free estimate and we’ll talk through the spec.
Afternoon heat is the likely culprit – prolonged UV and 100°F+ temperatures cook control board components and can cause the operator to reverse or stall. On south- and west-facing gates in Henderson’s master-planned subdivisions, the board and heat sink take the worst of it. A tech will check the board, verify the safety photocells aren’t tripping, and confirm the gate isn’t dragging on a shifted post before calling it a board failure. Call (888) 300-3906 for a free estimate.
Usually the gate, not the motor. A dragging gate almost always means a hinge post has settled or shifted, which is common on the sloped driveways in Seven Hills and Anthem where settling soil throws posts out of plumb. The motor then works against gravity and eventually strains or fails. Getting the post and track right first is the fix – replacing the motor without it just repeats the problem. Call (888) 300-3906 for a free estimate.
A compliant gate needs working entrapment protection – either built-in or external photocells and safety edges that stop or reverse the gate on contact. If your gate moves without a photocell beam or contact edge, it doesn’t meet UL 325. We check photocell function and safety edges as part of any motor service in Henderson, and we flag anything that needs updating. Call (888) 300-3906 for a free estimate.
Yes – keypad and intercom integration is routine on the major operators we service, including Linear, Viking, and BFT units, and it works with most existing Henderson gate motors. We confirm your operator’s control inputs and wiring during a free on-site measure, then quote the parts and labor in writing. This is scheduled work, not a same-day dispatch – we order the right piece for your system. Call (888) 300-3906 for a free estimate.
Get Your Henderson Gate Working Again
Whether it’s a reversing slide gate in Green Valley, a settled post on a Seven Hills hill lot, or a battery backup that quit during the last outage, our Gate Motor & Opener team is ready to take a look. Pricing is quoted and agreed before any work starts, the 90-Day Done Right Promise is on every job, and a live person answers the phone. Call (888) 300-3906 for a free estimate.
Written by the team at Gatewood Fence & Gate.